If your network doesn’t automatically assign network settings to your
computer, you may have to manually enter the settings yourself. This topic
assumes that you already know the correct settings to use. If not, you may
need to ask your network administrator or look at the settings of your router
or network switch.
Pour configurer manuellement vos paramètres réseau :
-
Ouvrez la vue d’ensemble des Activités et commencez à saisir Paramètres.
-
Cliquez sur Paramètres.
-
If you plug in to the network with a cable, click Network.
Otherwise click Wi-Fi.
Vérifiez que votre carte sans fil est allumée, ou qu'un câble réseau est connecté.
-
Click the
settings
button.
For a Wi-Fi connection, the
settings
button will be located next to the active network.
-
Select the IPv4 or IPv6 tab and change the
Method to Manual.
-
Type in the IP Address and
Gateway, as well as the appropriate Netmask.
-
In the DNS section, switch the Automatic switch
to off. Enter the IP address of a DNS server you want to use. Enter
additional DNS server addresses using the + button.
-
In the Routes section, switch the Automatic
switch to off. Enter the Address, Netmask,
Gateway and Metric for a route you want to use.
Enter additional routes using the + button.
-
Click Apply. If you are not connected to the network, open the
system menu from the right side of
the top bar and connect. Test the network
settings by trying to visit a website or look at shared files on the
network, for example.